MICROROCK
BICOMPONENT MICROCEMENT
Microröck line is characterized by being bicomponent and waterproof. It has unparalleled features so far, since it is a microcement whose hardness is superior to that of polished cement with a mineral appearance. In addition, its resistance to compression and traction is incomparable. Thanks to this, the sealants do not soften the product and the microcement is not affected by solvents or chemical compounds.
Due to its impermeability it is not necessary to apply several layers of sealant to protect it. A single coat of varnish is enough to avoid dust and stains.
It does not break or crack. It does not stain either. It has a high adherence to any support. It is specially designed to apply in areas of high traffic.
Due to its impermeability it is not necessary to apply several layers of sealant to protect it. A single coat of varnish is enough to avoid dust and stains.
It does not break or crack. It does not stain either. It has a high adherence to any support. It is specially designed to apply in areas of high traffic.
Mass waterproofing
Minimal stucco effect
Compression resistance
Waterproofing
Coating
Quality
MICRORÖCK CHARACTERISTICS
Ready to use + hardener
Composition
GRANULOMETRIES
Possible microcement textures
Fine
Medium
Base
PRODUCT RANGE
FINE
__________________
__________________
It is a microcement of fine texture finish. Adding the toner of the chosen color we will obtain a decorative surface with almost no stucco effect. It is recommended for both vertical and horizontal surfaces. Classified according to Standard UNE-EN 13813 as CT-C40-F10.
Performance: 0,6 Kg/m²
Proportion: 10 Kg Fine Microröck + 1L of catalyst
Format: 10 Kg
Performance: 0,6 Kg/m²
Proportion: 10 Kg Fine Microröck + 1L of catalyst
Format: 10 Kg
MEDIUM
__________________
__________________
It has a coarse granulometry than the Fine Microröck. With just stucco effect. Adding the toner of the chosen color, the result will be a slightly textured surface, much more resistant and of superior hardness. The thickness of the aggregate makes it non-slip. It can be applied on a multitude of supports, however, its most recommended use is on pavements with a high traffic. It can also be applied on vertical surfaces.
Classified according to Standard UNE-EN 13813 as CT-C40-F10.
Performance: 1 Kg/m²
Proportion: 10 Kg Microröck Medium + 1L of catalyst
Format: 10 Kg
Classified according to Standard UNE-EN 13813 as CT-C40-F10.
Performance: 1 Kg/m²
Proportion: 10 Kg Microröck Medium + 1L of catalyst
Format: 10 Kg
BASE
__________________
__________________
It is a microcement that is used as a preliminary step to the Fine Microröck or Medium Microröck. However, it can also be applied as a single step for the same base to act as a final finish. The result will be a much rougher surface, without any stucco effect and with a high nonslip power. Adding the toner of the chosen color we will obtain a decorative finish, with a high planimetry
that will allow the product to match very well on horizontal surfaces. It is recommended for pavements and floors of extreme traffic. It can also be applied on vertical surfaces.
Classified according to Standard UNE-EN 13813 as CT-C40-F10.
Performance: 2 Kg/m²
Proportion: 10 Kg Microröck Base + 1L of catalyst
Format: 10 Kg
that will allow the product to match very well on horizontal surfaces. It is recommended for pavements and floors of extreme traffic. It can also be applied on vertical surfaces.
Classified according to Standard UNE-EN 13813 as CT-C40-F10.
Performance: 2 Kg/m²
Proportion: 10 Kg Microröck Base + 1L of catalyst
Format: 10 Kg
© 2023 Lucrum Decor Floor Studio SIA
Official distributor and representative of Cemher in Latvia
Official distributor and representative of Cemher in Latvia
MENU
Contact Us
- Phone: +371 26890813
- E-mail: lucrumstudio@gmail.com
- Address: Jūrkalnes iela 1, Rīga, LV-1046, Latvia
Opening hours
- Monday - Friday: 10.00-17.00
- Saturday - Sunday: closed
