MICROLEVEL

It is a microcement of fine texture finish. Adding the toner of the chosen color we will obtain a decorative surface with stucco effect. It is recommended for vertical surfaces, since it is not non-slip. However, it could also be applied on horizontal surfaces.
Classified as CT-C30-F9 according to the UNE-EN 13813 standard.

Performance: 0,5 Kg/m²

Proportion: 10 Kg Microlevel Fine + 3,5 L of water

Format: 10 Kg

Having a thicker particle size than the Fine Microlevel, its finish is more subtle (less water). Adding the toner of the chosen color, the result will be a slightly textured surface, much more resistant and of superior hardness. The thickness of the aggregate makes it non-slip. It can be applied on a multitude of supports, however, its most recommended use is on pavements with medium traffic. It is recommended only for horizontal surfaces.
Classified as CT-C40-F10 according to the UNE-EN 13813 standard.

Performance: 0,6 Kg/m²

Proportion: 20 Kg Microlevel Medium + 6 L of water

Format: 20 Kg

It is a microcement that is used as a preliminary step to the Fine Microlevel or Medium Microlevel. However, it can also be applied as a single step for the same base to act as a final finish. The result will be a much rougher surface, without any stucco effect and with a high nonslip power. Adding the toner of the chosen color we will obtain a decorative finish, with a high planimetry that will allow the product to match very well on horizontal surfaces. It is recommended for pavements and
floors of extreme traffic.
Classified as CT-C40-F10 according to the UNE-EN 13813 standard.

Performance: 1 Kg/m²

Proportion: 20 Kg Microlevel Base + 5 L of water

Format: 20 Kg