MICRODUO

It is a microcement of fine texture finish. Adding the toner of the chosen color we will obtain a decorative surface with stucco effect. It is recommended only for vertical surfaces, since it is not non-slip.

Performance: 0,5 Kg/m²

Proportion: 10 Kg Microdur Fine + 5 L de Resincem

Format: 10 Kg

Having thicker granulometry than Microduo Fine, its finish is more subtle (less water). Adding the toner of the chosen color, the result will be a slightly textured surface, much more resistant and of superior hardness. The thickness of the aggregate makes it non-slip. It can be applied on a multitude of supports, however, its most recommended use is on pavements with medium traffic. It can also be applied on vertical surfaces or walls.

Performance: 0,6 Kg/m²

Proportion: 20 Kg Microduo Medium + 8L the Resincem

Format: 20 Kg

It is a microcement that is used as preliminary step to the Microduo Fine or the Microduo Medium. However, it can also be applied as a single step for the same base to act as a final finish. The result will be a much rougher surface, without any Stucco Effect and with a high non-slip power. Adding the Toner of the chosen color we will obtain a decorative finish, with a high planimetry that will allow the product to match very well on horizontal surfaces. It is recommended for pavements and floors with extreme traffic. It can also be applied on vertical surfaces or walls.

Performance: 1 Kg/m²

Proportion: 20 Kg Microdur Base + 8 L the Resincem

Format: 20 Kg

Resincem is a special resin for two-component microcement systems (Microduo). When mixed in the appropriate proportions it provides excellent compatibility, hardness and adherence to microcement and mortar systems.

Format: 5 L, 8 L, 10 L and 25 L